URRG

General Rocketry => High Power => Topic started by: dbmccann on March 16, 2016, 02:26:08 PM

Title: Got my AG71/ Gorilla cases in :)
Post by: dbmccann on March 16, 2016, 02:26:08 PM

Couldn't pass up that deal.   I just got shipment of my internals, so I thought I'd share a photo or two.   

Nozzles and bulkheads are from Dan Patell, Cases are from AG71,  thrust and snap rings from McMaster (going to need a bit of grinding).  Currently going to share nozzle washers until I can get some more of those.   Went with 28 for the 54/1050,   36 for the 54/1750, and 44 for the 54/2550 on the nozzles.

(https://c2.staticflickr.com/2/1458/25208546194_377951199b_b.jpg)


And with all my 54mm snap rings.   Loki 54/1200, 54/1050, Loki 54/1600, nozzle for a 54/1750 still on it's way to me, and the 54/2550.  (again no nozzle washers installed yet on the AG71 cases)

(https://c2.staticflickr.com/2/1462/25718115802_4cbe857c14_b.jpg)
Title: Re: Got my AG71/ Gorilla cases in :)
Post by: dbmccann on March 16, 2016, 02:59:22 PM
(https://c2.staticflickr.com/2/1646/25814288266_fabec7514b_z.jpg)
(https://c2.staticflickr.com/2/1713/25745234361_ac8086bf46_z.jpg)
(https://c2.staticflickr.com/2/1590/25719386292_700f7df83d_z.jpg)
Title: Re: Got my AG71/ Gorilla cases in :)
Post by: Larry Weibert on April 26, 2016, 04:30:33 AM
Great deals look very nice